2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

P0270 code won't clear

Thread Tools
 
Search this Thread
 
Old Nov 23, 2006 | 11:21 AM
  #1  
csam5150's Avatar
csam5150
Thread Starter
Joined: Nov 2006
Posts: 2
Likes: 0
Default P0270 code won't clear

Last year I came up with code Po270 on my 99 V6 Dakota and replaced the rear speed sensor. Simple enough.
I just had the same code come up again, however after replacing the sensor again and
clearing the code, after a minute the code came right back. The vehicle runs fine with the
exception of taking a few more RPMs to shift gears. Is there anything else that is usually
associated with this error code?
Thanks.
 
Reply
Old Nov 23, 2006 | 11:52 AM
  #2  
csam5150's Avatar
csam5150
Thread Starter
Joined: Nov 2006
Posts: 2
Likes: 0
Default RE: P0270 code won't clear

Correction P0720.
 
Reply
Old Nov 23, 2006 | 05:52 PM
  #3  
horatio102's Avatar
horatio102
Champion
Joined: Feb 2005
Posts: 3,710
Likes: 2
From: Skagit County, WA
Default RE: P0270 code won't clear

The code reads that the output shaft speed isn't within spec of vehicle speed. Sounds like there is a sensor on the tranny output?
 
Reply




All times are GMT -4. The time now is 11:31 PM.