i've got 31x10.50's on my truck how hard would it be to put 32x11.50's on it?

 

You will not be able to fit them without some serious cutting if you do not have a lift kit.

 

I'm not sure if the Sport you have has the same clearance as my SLT but I have 32x11.50s with no cutting, no rubbing on turns...perfect fit. Check out the pics on my gallery. They look great.

 

my truck is 4 wheel drive virused they sit up higher from the factory. The only place i'm worried about is the frame on tight corners. Would wheel spacers help?

 

If you have the same clearnance as me, like I said, I dont rub at all....even on sharp turns. It comes close but its got about 1/2" to 1" of clearance on the front spacing when I am turning and plenty on the back spacing.

 

shouldn't be a problem, i don't have the 4x4 but the 32's should fit
our dak's have HUGE wheelwells
The F250 at work rubs with the STOCK tires[&:]
________
HotBlondyBabe

 

32's will fit fine ,the only problem i have is i am running mopar running boards and they rub where the boards mount to the fender flares not biggy
i have noticed they do rub the inner fender when turnt to the lock position
if you lived close ot me i would just let you try 1 and see
these were new when i bought the truck and honestly i would sooner have the 31's on it and keep it stock just preference i guess