Hi to all.....I`m new to you, but you all are not new to me... I`v been reading
this forum almost daily since i bought my dak. in January 2007.
This is by far the best forum out there....U guys rock!!!!!

Myquestion is this....Can u change the shift points on an automatic tranny??
and how....If its possible.
My truck changes gear way to soon....it barley rev`s past 2,000rpmand then
changes to the next gear.....even when i stomp on it....so i have to manually
change it to rev it out more.

My truck info is below.....Thanx!!

 

2 things you can do is go out and spennd 400.00 on a hypertech or superchips programs so you can mess with the peramiters and set your own shift points, or you can try reseting your computer. remove neg./ battery cable and turn ignition key all the way forward and hold for 15 sec. this will clear the memory reinstall cable and start and stop truck 3 times. on the thrid time leave truck running for 5 min and take it for a ride. if this dosent cure the problem then maybe a shift kit. also when was the last time the tranny fluid was flushed and serviced. my 05 4.7 pulls to 6 grand and shifts real hard and tops out at 118 on the highway.

 

welcome to the forum

ya, I would change the trany fluid, filter and see if that helps. if not it might bethe TV cable or something like that out of adjustment. mine will shift just after 5grand when I hold it to the floor

 

Thanx guys.....the fluid LOOKS clean but i will change it anyway with the filter and see if that helps...

Just wondering SUPERDAK why start and stop 3 times after resetting the comp.???

 

start and stop 3 times will let the computer learn faster, or else it will take 300 miles for it to learn everything.

 

Welcome to the forum!

 

Welcome to the forum hope u enjoy your stay. And like always please remember to keep your hand inside the windows at all times.

 

is that safe to take a 318 to 5 grand? my truck is a manual and the red on the gauge starts at 4 and 3/4

 

you can take it there, dont do it too often. I take mine there once in a while to clean things out and cause I like the sound

 

Thanx for all your replies............My RPM gauge does not have a red line......werd huu...i guess i can
hold it until she blows.....