Hi All
How do i wire in my Tekonsha brake controller to a 2007 dodge durango,
My Durango did not have a factory tow package. I bought the OEM after market harness from dodge and installed. I ended with a blue wire that terminates under the dash. how do i tie in my controller to this, and is there another plug that i am supposed to add the blue wire into. and then another harness from that to my controller?

here are the part numbers for the installed harness and the controller.

Harness 82209773AC
Controller Tekonsha Voyager TE9030

Thanks for your help.

John

 

yea , you have to get a electric brake controller .
the blue wire connects to the blue wire on the controller , the electronic brake controller will also connect to 12v power , ground and i believe the white/ brown wire off the brake switch .
but double check the on the white / brown wire

 

It is a beige wire with a tan stripe.