Hi yall, I was just wondering if anyone knew if there is a lift kit for my truck and how much. I need some height on this thing it`s too low. Let me know please. Riding4life162@yahoo.com

 

I don't know where you are, but for accessories the best I have found is Ohio Light Truck.
www.oltpc.com
The do a lot of business on the internet and have anything you can think up for truck accesories.

 

I've never seen or heard of a lift kit for any Durango newer then 2002. You can get one custom made, but that's going to require a small sum of monetary value.

 

I`m located in hawaii

 

I haven't looked at the new Durangos, but if it is on a frame a body lift may help. It won't gain you any more ground clearance, but it will get you up a little bit.

 

You can safely raise the front end by adjusting some torsion bar screws.This will not void the warrenty except for maybe the tires,I checked with the dealer.Simply follow the torsion bars back find two screws in about the center between front and rear wheels.First raise the front end to releive pressure from front end, tighten them down about 4 to 7 turns depending on the lift you want, lower the front end and see what you got. This can raise the front even with the back,no more minivan look!! get it realigned just because.

Dave

 

I also have been trying to find a lift kit for a 2004 durango thats bigger than 3", but no luck. Being a metal fabricator and an installer of many off-road lift kits, I have decided to do more research and possibly build my own kit for the 04 durango and possibly later years if it is possible. If anybody has any info on the availability of a lift kit or any technical info why there shouldn't be one made, please let me know.

 

check airbagit-store.com they have one but I have not found anyone whos trusts it enought to install it for me. AIM is not known for making lift kits.

 

AIm Is not a depenable company at all THEY SUCK! and they have no clue what they're doing? BTW AIM and Chassis tech are the same company.

 

So there is no lift then?