2nd Gen Durango 2004 - 2009

2004 Durango 4.7 starting problems

Thread Tools
 
Search this Thread
 
Old Apr 6, 2015 | 12:23 PM
  #1  
cmhansen62's Avatar
cmhansen62
Thread Starter
|
Registered User
Joined: Apr 2015
Posts: 2
Likes: 0
Default 2004 Durango 4.7 starting problems

Two days ago I started my 2004 Durango. It had been sitting overnight when I went to start it. It started right up but ran rough. After a few seconds it smoothed out and everything was ok. Later that day after cooling down, I started it again and had the same problem. After a few seconds it was okay again. Yesterday I tried to start it and it wouldn't start. It cranked uneven like some of the cylinders had no compression. I thought maybe I had a broken timing chain. A few minutes later I tried again and it started right up and ran fine. I changed the spark plugs (which were worn enough they had excessive gap) and changed the oil. I then took it for a 70 mile drive and it ran fine. This morning my wife told me it wouldn't start again. Any thoughts on what could be wrong?
 
Reply
Old Apr 6, 2015 | 12:29 PM
  #2  
jkeaton's Avatar
jkeaton
DF Admin
15 Year Member
Photogenic
Photoriffic
Liked
Joined: Apr 2010
Posts: 28,204
Likes: 363
From: Winston Salem, NC
Default

Dirty air filter, dirty throttle body, IAC or TPS. Check engine lighht on?
 
Reply
Old Apr 6, 2015 | 12:40 PM
  #3  
cmhansen62's Avatar
cmhansen62
Thread Starter
|
Registered User
Joined: Apr 2015
Posts: 2
Likes: 0
Default

New air filter, no engine codes. Throttle body is not excessively dirty. I would think the IAC and TPS would throw a code if bad. The strangest thing is it runs great once started, and will start right back up if not allowed to cool down. The most troubling thing is the uneven cranking when it wont start. Could I possibly have a leaking injector causing flooding and possibly partial hydro-lock?
 
Reply




All times are GMT -4. The time now is 04:44 AM.