2nd Gen Durango 2004 - 2009

2005 Durango 5.7 Hemi - Multiple codes

Thread Tools
 
Search this Thread
 
Old Dec 16, 2015 | 09:14 PM
  #1  
MustangDos's Avatar
MustangDos
Thread Starter
|
Registered User
Joined: Aug 2011
Posts: 5
Likes: 0
From: Martinsburg, WV
Default 2005 Durango 5.7 Hemi - Multiple codes

So. I just bought this used today. Put on about 45 miles, a few stops, and the check engine light comes on. Checked and have 5 codes: P0325, P0330, P0340, P0344 & P0627. Drove home and almost got there and the truck shut off and wouldn't restart. A couple red lightning bolts showed up to the right of the check engine light. Walked home then came back with a 10mm wrench to disconnect the battery, but tried starting it first and it stated. Drove it the rest of the way home. Knock sensors, Cam sensors and Fuel Pump "A" sensor control circuit open. Help?!
 
Reply
Old Dec 17, 2015 | 07:10 PM
  #2  
MiniFormulaIndy's Avatar
MiniFormulaIndy
Amateur
Joined: Jun 2012
Posts: 35
Likes: 0
Default

PCM. Replace and reflash. Test the individual sensors each one. It is what it is. They knew it.
 
Reply
Old Dec 18, 2015 | 01:46 AM
  #3  
MustangDos's Avatar
MustangDos
Thread Starter
|
Registered User
Joined: Aug 2011
Posts: 5
Likes: 0
From: Martinsburg, WV
Default

Ended up being the aftermarket alarm system installed interfering with the vehicle. Someone unplugged it cuz they couldn't find the fob. Cam sensor was bad but not the knock sensors or the fuel pump. They took care of it for me.
 
Reply




All times are GMT -4. The time now is 02:30 AM.