Drive cycle
Drive cycle
#2
01-23-2009 | 09:03 PM
Registered User
Joined: Jan 2009
Posts: 1
Likes: 0
Drive cycle Dodge Intrepid V6 2.7 Engine
I am looking for the Dirve Cycle for a 2000 Intrepid ... any help appreciated.
This is what I did
1- Find a highway with little traffic
2- Drive the car at the speed of 55Mph steady for 3-5 minutes
3- Take your feet from gas pedal and let the car slow down to 5Mhp to 0Mhp don't step on the brake pedal unless necessary.
4- Repeat the process one more time
5- Drive the car at 35Mhp and slow down and stop
6- Repeat this 3 or 4 times
7- Drive the car above 55mph for 5 minutes and stop
8- Let the car idle for about 3 min.
9- Turn the ignition off
This cycle should register data to ECU unit
I put 35-50 miles for this cycling process
This is what I did
1- Find a highway with little traffic
2- Drive the car at the speed of 55Mph steady for 3-5 minutes
3- Take your feet from gas pedal and let the car slow down to 5Mhp to 0Mhp don't step on the brake pedal unless necessary.
4- Repeat the process one more time
5- Drive the car at 35Mhp and slow down and stop
6- Repeat this 3 or 4 times
7- Drive the car above 55mph for 5 minutes and stop
8- Let the car idle for about 3 min.
9- Turn the ignition off
This cycle should register data to ECU unit
I put 35-50 miles for this cycling process
