2nd Gen Intrepid 1998 through 2004 Intrepids

starter on a 1998

Old Oct 12, 2009 | 07:58 PM
  #1  
jeeper01ca's Avatar
jeeper01ca
Thread Starter
|
Registered User
Joined: Oct 2009
Posts: 2
Likes: 0
Default starter on a 1998

what's the location of the starter on a 1998, 3.2L and which pin shall I connect to the ground to get it started?
 
Reply
Old Oct 12, 2009 | 09:01 PM
  #2  
shelbydaytona's Avatar
shelbydaytona
Banned
Joined: Oct 2009
Posts: 143
Likes: 0
Default

u dont ground any pin on the starter that wont do no good. why do u want to jump the starter? u can do it at the relay in the underhood fuse block. and the starter is under the car on the left side
 
Reply
Old Oct 12, 2009 | 11:55 PM
  #3  
jeeper01ca's Avatar
jeeper01ca
Thread Starter
|
Registered User
Joined: Oct 2009
Posts: 2
Likes: 0
Default

u can do it at the relay in the underhood fuse block
How do you do it?

the starter is under the car on the left side
Is that from the driver side?
 
Reply
Old Oct 13, 2009 | 06:30 AM
  #4  
shelbydaytona's Avatar
shelbydaytona
Banned
Joined: Oct 2009
Posts: 143
Likes: 0
Default

Originally Posted by jeeper01ca
How do you do it?
with a paper clip


Originally Posted by jeeper01ca
Is that from the driver side?
on the left side, is there any other left?? have a look and u will see it
 
Reply
Old Oct 16, 2009 | 04:24 PM
  #5  
DESIREESAVENGER's Avatar
DESIREESAVENGER
Rookie
Joined: Jul 2008
Posts: 90
Likes: 0
Default

Take the cover off of the power distribution center. Remove the starter relay. Look at the diagram on the relay. Visualize which terminal on the relay corresponds to the openings left in the pdc when you removed the relay. Connect terminals 30 and 87a.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 02:31 AM.