2nd Gen Intrepid 1998 through 2004 Intrepids

Car is stalling and having issues P0129 Help

Thread Tools
 
Search this Thread
 
Old May 16, 2011 | 06:54 PM
  #1  
AlexCF's Avatar
AlexCF
Thread Starter
|
Registered User
Joined: Apr 2011
Posts: 3
Likes: 0
Default Car is stalling and having issues P0129 Help

I just had my shift solenoid replaced at a transmission shop. He told me I needed a new o2 sensor. I had the car for a few days everything was great! Really happy now I had my car fixed. But when I was at a stop light and I it turned green when I pressed on the gas it seemed like it was running out of gas or something the RPM's were shooting up and I pulled over to a parking lot and my car turned off on me. It wouldnt start for about 3 minutes of trying.

At that point I heard a DING and my check engine light came on. Got the code
P0129 - Generic - Barometric Pressure Too Low.

My question is: Is this an O2 sensor? Because it would be telling me in the codes that it was right? People have told me if it was the oxygen sensors it would have a bad idle, bad gas millage and a few other issues

I was looking into this and someone suggested it being a MAP Sensor or a CAM Sensor?

Has anyone else had this issue can they help me?
 
Reply
Old Jun 13, 2011 | 10:28 PM
  #2  
saxmo59's Avatar
saxmo59
Registered User
Joined: Jun 2008
Posts: 11
Likes: 0
Default Map Sensor

My 2002 3.5 Intrepid exhibited the same symptoms.Stalling,RPM's would go up and down and poor performance which was corrected with a new map sensor.Very easy fix.The part was $89 at Auto Zone.
 
Reply




All times are GMT -4. The time now is 01:17 PM.