When i started taking my lower control arm off i noticed the back bolt was coming off hard. After a few tries of taking it off the nut inside the frame came loose. Now all it does is turn. How can i get to the nut to stop it from turning. It is the bolt by the stabilizer bar cosest to the rear of the car on the left front. Please i need help! Thank you

 

Does any one have any ideas or will i have to cut throught the frame?

 

well the bolt itself might have had splines on it to keep it from turning in the first place. you said it was hard, did it turn very little slowly, or not at all and then all at once. if it is all at once, you snapped the splines and thats not good.

 

a little at a time then it came loose. What do you think it is and how could i fix it.

 

the bolt is still in and will not come out.

 

is it that the bolt just spins freely now and the nut isnt doing anything? are you trying to get it off or on