how to remove stock radio?
Thread Starter
|
Captain
Joined: Mar 2007
Posts: 605
Likes: 0
From:
how to remove stock radio?
im trying to hook a amp up to the stock radio and wanna know how to remove it so i can get to the remote wire? any help would be appreciated. and yes i know this isnt the best way to do it but i have run 3 cars the same way.
Veteran
Joined: Apr 2007
Posts: 284
Likes: 0
From:
RE: how to remove stock radio?
take out the two air vent in the middle by popping them out. then there's two screws right behind them. take those out. then pull on the bezel? or whatever you call that cover on the whole front panel till it comes off. then you'll see there's screws for the stock factory radio. Remove them and it should just come right out. Good luck 
Veteran
Joined: Apr 2007
Posts: 284
Likes: 0
From:
RE: how to remove stock radio?
oh yeah, once you remove the two screws from the air vent and start pulling out the dash cover? bezel? you will notice that it feels like it's still attached at the bottom of it... just pull hard on it... it's just clips at the bottom. when reinstalling just the the same thing backwards and the clip would just clip right in.
Section Moderator
Joined: Apr 2006
Posts: 4,505
Likes: 0
From: Pennsylvania
RE: how to remove stock radio?
ORIGINAL: dodgeneonz
take out the two air vent in the middle by popping them out. then there's two screws right behind them. take those out. then pull on the bezel? or whatever you call that cover on the whole front panel till it comes off. then you'll see there's screws for the stock factory radio. Remove them and it should just come right out. Good luck
take out the two air vent in the middle by popping them out. then there's two screws right behind them. take those out. then pull on the bezel? or whatever you call that cover on the whole front panel till it comes off. then you'll see there's screws for the stock factory radio. Remove them and it should just come right out. Good luck
(location of the 'clips' were guessed in the picture)