Nitrous help
ORIGINAL: PICKLEZ
Stay away from the nitrouse unless you have done cam upgrades valves lifters etc. a stock motor is not set up for things like that...better yet stay away altogether save yourself the headache.
Stay away from the nitrouse unless you have done cam upgrades valves lifters etc. a stock motor is not set up for things like that...better yet stay away altogether save yourself the headache.
nitrous is fine to use if used in moderation. dont try putting a 150 shot on a stock bottom end. 50 shot would be fine if you dont push the engine to hard like redlining it or bouncing of the rev limiter.
thanks a ton for all your help, im gonna go pick up the T-splice today..everything else is hooked up and i cant wait to try it out on the track. : ) thanks again everyone, and yes im only runnin a 50 shot for now untill i get further upgrades
ORIGINAL: antitrustspider
Please don't get into religion [:'(]
I wouldn't want to offend anyone if I start talking about it.
ORIGINAL: AirWolf
I dont think so Only the Lord is Perfect.
I dont think so Only the Lord is Perfect.
I wouldn't want to offend anyone if I start talking about it.
ORIGINAL: gnu4life778
Hey im new here, and this is my first dodge neon and I LOVE IT!
my previous cars were a civic and a chevy prizm( beater car)
i just bought a Nitrous Express kit from a friend for 300 bucks today but i have a few questions about hooking it up.
I can hook up everything but i ran into a problem with the fuel line/rail (its a wet shot btw)
Since the previous kit was for a ford s10, apparently it does not hook up to the dodge fuel rail.. or thats what the guy from the local speed shop claims. I was just wondering if i could get a part to screw into the fuel rail or should i just T-splice or Y-splice the line from the fuel line? Any help or comments would be much help. Does anyone else here run a wet shot? could you send me a pic if so
Hey im new here, and this is my first dodge neon and I LOVE IT!
my previous cars were a civic and a chevy prizm( beater car)
i just bought a Nitrous Express kit from a friend for 300 bucks today but i have a few questions about hooking it up.
I can hook up everything but i ran into a problem with the fuel line/rail (its a wet shot btw)
Since the previous kit was for a ford s10, apparently it does not hook up to the dodge fuel rail.. or thats what the guy from the local speed shop claims. I was just wondering if i could get a part to screw into the fuel rail or should i just T-splice or Y-splice the line from the fuel line? Any help or comments would be much help. Does anyone else here run a wet shot? could you send me a pic if so
Hey Im use to being bashed on becasue Im a Christian so Ill stop for now . That family thing was towards anti because he thinks my ride means more to me than anything and they dont . Sorry also for the thread hi jack.


