2nd Gen Neon 2000 - 2005 2nd Gen Neon

Battery movement

Old Aug 16, 2007 | 02:42 AM
  #1  
underdogneon's Avatar
underdogneon
Thread Starter
|
Professional
Joined: Jun 2007
Posts: 101
Likes: 0
From: OR
Default Battery movement

I was considering moving my battery into the trunk. Has anyone done that here? And would there be any bad effects from doing it?
 
Reply
Old Aug 16, 2007 | 03:25 AM
  #2  
Rodge57's Avatar
Rodge57
Professional
Joined: Jul 2007
Posts: 219
Likes: 0
Default RE: Battery movement

Any reason why you would wanna do this?
 
Reply
Old Aug 16, 2007 | 03:52 AM
  #3  
antitrustspider's Avatar
antitrustspider
Veteran
Joined: Jun 2007
Posts: 264
Likes: 0
Default RE: Battery movement

Would change the weight distribution. You'd have to make sure to ground it properly in the trunk too. Also costs more for the wiring. I think they usually use 0 or 00 guage wire for that. Usually about $50 for a relocation kid.

Usually with race cars they move it into the back for better traction, but that's usually for RWD cars.
 
Reply
Old Aug 16, 2007 | 03:55 AM
  #4  
nswap7's Avatar
nswap7
Captain
Joined: Nov 2006
Posts: 599
Likes: 0
From:
Default RE: Battery movement

put the weight on the ***.lol
 
Reply
Old Aug 16, 2007 | 11:51 AM
  #5  
Adionik's Avatar
Adionik
Champion
Joined: Feb 2007
Posts: 2,546
Likes: 0
From: S.A
Default RE: Battery movement

I wanted to do this to free up some space in the engine compartment. But it looks like a PITA and I would have no idea where to start.
 
Reply
Old Aug 16, 2007 | 12:29 PM
  #6  
Kapitald's Avatar
Kapitald
Captain
Joined: Dec 2006
Posts: 705
Likes: 0
From: Chattanooga, TN
Default RE: Battery movement

Doesnt seem that hard to me.....just make a mounting bracket in the trunk so it doesnt slide around....and just like wiring for a speaker system you can run the positive wire to the front by drilling a hole in the firewall and putting a grommet there.....then once the wire is put through the firewall just attach it to your starter wire....you can ground the battery to the trunk latch...unbolt the bolts holding the trunk latch in place (make sure u align them right when putting them back on or the trunk wont shut properly)...take the trunk latch off and sand the paint off the chasis...dont worry nobody can see it lol....then run your ground wire there and bolt the latch back down on top of it holding it in place....i would think 2 or 4 gauge wire would suffice fine....get a big audio system and you might want a larger wire...seems simple to me....

good for weight distribution and freeing up room like u said.
 
Reply
Old Aug 16, 2007 | 12:42 PM
  #7  
Adionik's Avatar
Adionik
Champion
Joined: Feb 2007
Posts: 2,546
Likes: 0
From: S.A
Default RE: Battery movement

so you're saying this will make me run in the 12's?
 
Reply
Old Aug 16, 2007 | 12:46 PM
  #8  
Kapitald's Avatar
Kapitald
Captain
Joined: Dec 2006
Posts: 705
Likes: 0
From: Chattanooga, TN
Default RE: Battery movement

what!?!?!?!?!? lol i didnt say it would make you faster???
 
Reply
Old Aug 16, 2007 | 12:48 PM
  #9  
Adionik's Avatar
Adionik
Champion
Joined: Feb 2007
Posts: 2,546
Likes: 0
From: S.A
Default RE: Battery movement

yes you did. you said

"adionik if you put your battery in the trunk you will run in the 12's to mid 11's. i said this and i can't take it back even if i deny it later"
 
Reply
Old Aug 16, 2007 | 12:49 PM
  #10  
Kapitald's Avatar
Kapitald
Captain
Joined: Dec 2006
Posts: 705
Likes: 0
From: Chattanooga, TN
Default RE: Battery movement

what??!?!?! lol okay then...whatever lol

but really....i shouldnt be that hard to accomplish....
 
Reply

Thread Tools
Search this Thread

All times are GMT -4. The time now is 03:18 PM.