Is there like a how-to on wiring them up or a diagram/picture? Maybe someone here can just tell me what color wires go where? I have 2002 SXT, no HID set-up or anything like that. Thanks.

 

um ok i kno ricerchik did a write up but here ill try. sorry i dont have pics

1. take ur stock headlights out

2. now that is out of da way. u can connect ur leds to ur headlights so dey turn on wen u turn on ur headlights

3. now u need ot splice into da turn signal lights.

4.Black is ground and white is power. so connect black wit black and white wit da black and yellow so ur halos turn on wit ur parking lights.

good luck and let me kno how itgoes. u should be done in 20-40 minutes

heres da link wen i helped ricerchik https://dodgeforum.com/m_974943/tm.htm

 

suggestion, wire the LED Halos up with your parking lights so they come on without the headlights being on

 

Ok, well what do I do with the little red and black wires coming out of the bottom of the headlight housing?

 

What year is ur car and what halos did u get? Are the little red and blackwires on the new headlights?
I never touched the headlight wires, only spliced into the parking/turn wires.

 

OK now, have any of you aimed the highs? I haven't had the time, but plan on it this weekend, what do the three screws do? Yeah, not sure what the red/black is...but deff. take the above advice and wire the halo's to the parking lights

 

Been too lazy to aim anything, lol. I just got around to raising the lows a little higher but they're still uneven.

 

let me take a pic for you guys real quick

 

When i did them on my boys car they were plug and play.. The halos I just ran to the corner bumper lights so they went on with them...took like 40min tops..
Each LED should have 2 wires comming off it black and white usally...Since there LEDs there polarized and will only work one way...so you dont have to worry bout positve and negitve cuz if it dont work one way just flip the wires around and it will work the other way..just splice the wirescomming from the leds into the bumper lights and thats about it..If you did this and the lights still dont work then flip the bulbs or the wires cuz its only gunna work 1 way.

 

mine r still uneven, i get lazy and havent adjusted them