I have a k&N typhoon cold air intake but i can't install it because I am missing a part...I think its called the throttle body boot. i have a picture to help. it is the part that stretches from the throttle body that allows me to finish installing the cold air system. please help I have looked everywhere.




[IMG]local://upfiles/79127/B766053A3A314F289E86598A943CA25C.jpg[/IMG]

[IMG]local://upfiles/79127/B559E608BDB149FABC3C11C5C8130DD2.jpg[/IMG]

 

K&N didn't come with one. That's why they are FTL.

You are supposed to use your stock bellows tube.

 

I don't have a problem with the stock bellows tube. K&N FTW in my opinion.

 

that's the stock boot. it's already on your car

Misinformation FTL

 

when i got the car it had a intake in it and it doesnt have one...i know its a stock part but i dont have it hahaha

 

I don't know where you can buy one online or w/e, but the first place I would look is a local junkyard if you could find one..

 

if you want a stock one

http://forum.2gn.org/viewtopic.php?t=26778

he's selling one

 

i just used a cheap one from an ebay cai before i bought the k&n all you need is a metal pipe and clasps and the rubber

 

damn izeros expensive...he posts on here too. 60 for 02 tails?

 

why don't you just go to your local auto parts store and by one of those small pieces of exhaust tubing, throuw a couple of couplers on it and call it a day.

$2 for the pipe and 2 couplers will cost you under $10