need some quick help
Thread Starter
|
Captain
Joined: Jul 2007
Posts: 652
Likes: 0
From: milford pa
need some quick help
a while ago neon r/t posted a quick list of all the parts needed to do the atx to mtx swap I have a whole donor car and just want to make sure i put the right parts into it and not leave any out? any1 find this list? if so i'll write up a how to after i swap it to end all questions on the subject...i promise lots of pictures also
Grand Champion
Joined: Nov 2005
Posts: 6,258
Likes: 0
From: Charleston, SC
RE: need some quick help
Right from my 2nd Gen Performance FAQ 
Q: Can I swap in a manual transmission into my automatic Neon?
A: Yes, you can and will need the following: transmission (3.55 or 3.94), modular clutch, passenger side axle, clutch master and slave cylinder, shifter cables and clips, tranny side motor mount from a manual transmission 2nd gen, MTX PCM from your year car, shifter and shifter base, clutch and brake pedal assembly from a 2nd gen.
Q: Can I swap in a manual transmission into my automatic Neon?
A: Yes, you can and will need the following: transmission (3.55 or 3.94), modular clutch, passenger side axle, clutch master and slave cylinder, shifter cables and clips, tranny side motor mount from a manual transmission 2nd gen, MTX PCM from your year car, shifter and shifter base, clutch and brake pedal assembly from a 2nd gen.
