Where did my Project Thread go????
#11
#13
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
Well... I took another look at teh line and right at the disconnect i use my "special tool" (wrench) and was able to get it disconnected.. I hope it will go back together.
![Name: IMG_1303.jpg
Views: 38
Size: 50.1 KB](https://dodgeforum.com/forum/attachments/2nd-gen-neon/116502d1501437400-where-did-my-project-thread-go-img_1303.jpg)
I was able to feed the line so far to manuver the master cylinder to a spot where I can use a bit small enough to use as a punch.
![Name: IMG_1304.jpg
Views: 52
Size: 64.2 KB](https://dodgeforum.com/forum/attachments/2nd-gen-neon/116503d1501437400-where-did-my-project-thread-go-img_1304.jpg)
I knocked out the pin and the hard line poped off.
Here is that P.I.T.A. pin..
![Name: IMG_1307.jpg
Views: 25
Size: 23.8 KB](https://dodgeforum.com/forum/attachments/2nd-gen-neon/116504d1501437400-where-did-my-project-thread-go-img_1307.jpg)
Here is the cylinder removed.....
![Name: IMG_1308.jpg
Views: 43
Size: 95.6 KB](https://dodgeforum.com/forum/attachments/2nd-gen-neon/116505d1501437400-where-did-my-project-thread-go-img_1308.jpg)
It was a bit easier putting it back in and reassmebled in the car... I haven't filled the resivor up yet. I need to figure how I bleed the system ...
![Name: IMG_1303.jpg
Views: 38
Size: 50.1 KB](https://dodgeforum.com/forum/attachments/2nd-gen-neon/116502d1501437400-where-did-my-project-thread-go-img_1303.jpg)
I was able to feed the line so far to manuver the master cylinder to a spot where I can use a bit small enough to use as a punch.
![Name: IMG_1304.jpg
Views: 52
Size: 64.2 KB](https://dodgeforum.com/forum/attachments/2nd-gen-neon/116503d1501437400-where-did-my-project-thread-go-img_1304.jpg)
I knocked out the pin and the hard line poped off.
Here is that P.I.T.A. pin..
![Name: IMG_1307.jpg
Views: 25
Size: 23.8 KB](https://dodgeforum.com/forum/attachments/2nd-gen-neon/116504d1501437400-where-did-my-project-thread-go-img_1307.jpg)
Here is the cylinder removed.....
![Name: IMG_1308.jpg
Views: 43
Size: 95.6 KB](https://dodgeforum.com/forum/attachments/2nd-gen-neon/116505d1501437400-where-did-my-project-thread-go-img_1308.jpg)
It was a bit easier putting it back in and reassmebled in the car... I haven't filled the resivor up yet. I need to figure how I bleed the system ...
#14
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
Well I've been out of town so I haven't worked on the clutch system in awhile... I put fluid in the system today, but need an extra hand with bleeding it...
On a second note, I received a call from a friend about some parts... I picked them up yesterday from the junk yard on my lunch.
What do you think?????
![Name: IMG_1317.jpg
Views: 22
Size: 49.0 KB](https://dodgeforum.com/forum/attachments/2nd-gen-neon/116121d1501436665-where-did-my-project-thread-go-img_1317.jpg)
![Name: IMG_1316.jpg
Views: 34
Size: 40.8 KB](https://dodgeforum.com/forum/attachments/2nd-gen-neon/116122d1501436665-where-did-my-project-thread-go-img_1316.jpg)
I got them for a great deal... 350.00 for all.. so what do you think????
Here is today pics...
![Name: IMG_1318.jpg
Views: 21
Size: 53.6 KB](https://dodgeforum.com/forum/attachments/2nd-gen-neon/116123d1501436665-where-did-my-project-thread-go-img_1318.jpg)
![Name: IMG_1320.jpg
Views: 37
Size: 83.2 KB](https://dodgeforum.com/forum/attachments/2nd-gen-neon/116124d1501436665-where-did-my-project-thread-go-img_1320.jpg)
and a pics of my license plate cover from being Car of the Month of March
![Name: IMG_1319.jpg
Views: 42
Size: 92.4 KB](https://dodgeforum.com/forum/attachments/2nd-gen-neon/116125d1501436665-where-did-my-project-thread-go-img_1319.jpg)
Oh I also installed the booger bushings... so no more shift play...
On a second note, I received a call from a friend about some parts... I picked them up yesterday from the junk yard on my lunch.
What do you think?????
![Name: IMG_1317.jpg
Views: 22
Size: 49.0 KB](https://dodgeforum.com/forum/attachments/2nd-gen-neon/116121d1501436665-where-did-my-project-thread-go-img_1317.jpg)
![Name: IMG_1316.jpg
Views: 34
Size: 40.8 KB](https://dodgeforum.com/forum/attachments/2nd-gen-neon/116122d1501436665-where-did-my-project-thread-go-img_1316.jpg)
I got them for a great deal... 350.00 for all.. so what do you think????
Here is today pics...
![Name: IMG_1318.jpg
Views: 21
Size: 53.6 KB](https://dodgeforum.com/forum/attachments/2nd-gen-neon/116123d1501436665-where-did-my-project-thread-go-img_1318.jpg)
![Name: IMG_1320.jpg
Views: 37
Size: 83.2 KB](https://dodgeforum.com/forum/attachments/2nd-gen-neon/116124d1501436665-where-did-my-project-thread-go-img_1320.jpg)
and a pics of my license plate cover from being Car of the Month of March
![Name: IMG_1319.jpg
Views: 42
Size: 92.4 KB](https://dodgeforum.com/forum/attachments/2nd-gen-neon/116125d1501436665-where-did-my-project-thread-go-img_1319.jpg)
Oh I also installed the booger bushings... so no more shift play...