yo guys i was wondering where can i get a 2.4 engine for my 2000 dodge neon.

 

Out of a wrecked srt4 or a stratus. If you have money you can take it to pa and have it all installed for 6,000. The srt4store does the swap for 6000 dollars.

 

alright what about just the engine? i can have someome install it here?

 

You can't just swap the engine. You need a lot more things than just the engine to do a 2.4 swap.

 

so your talking about the tranny and stuff too right?

 

yeah tranny, ecu, etc. Pretty much a parts car is key to have.

 

for an 2,4 srt swap you need
Engine and Tranny (duh)
Complete Engine Wiring Harness
Complete Engine Bay Wiring Harness
Power Steering Pump, lines, and cooler
Clutch master and slave cylinder
Clutch/Brake Pedal assembly
Intercooler Piping
Intercooler
Radiator Hoses
Tranny, Upper and Lower Motor Mounts (the holes are larger on the the upper and lower mounts for larger bolts and the tranny mount is completely different)
SRT PCM (wont' need the bracket with 03+)
Axles (and half shaft if it isn't on the engine)
Coolant Bottle
Fuel Line from tank to engine bay
Fuel Pump
Flex Fuel line from solid fuel line to fuel rail
Short evap hose that comes from the purge valve
All vacuum lines and the 3 selonids
o2 Sensors
Turbo Housing + o2 Housing
Lower Control Arms (they're stronger yet the same in shape)
Sentry Key Module + Key that matches the PCM VIN number.
Radiator (aren't totally sure if this is an absolute need)
Radiator Fans (it's a dual fan setup)
Shift Cables
Body Harness - fixes NVLD code (P0499)you will have on 00-02 swaps, also possibly fixes P0508 and P0688 codes.

If you plan on using the front brake setup you'll need the following

SRT Power steering rack (it's shorter)
Knuckles
Flexiable Brake Lines
Calipers
Rotors

 

lol, once people see that list its pretty much when they give up...

 

hey primedneon guy i would go with what smlallblockfreak said.
for $5500 its not bad of a swap and all u have to do is drive down there and pay them to do it then get it back 3 days later.

thats what im going to do hopefully sometime next summer.

but if ur looking into doing it urself then ull probably spend more than that cause u would have to but all the parts adise from the engine cause im sure u wont find a complete swap parts for less than $5000 with all lines then comes the hookups and all.

 

alright thanks alot guys