2nd Gen Neon 2000 - 2005 2nd Gen Neon

squealin' neon

Thread Tools
 
Search this Thread
 
Old Dec 21, 2008 | 02:40 AM
  #1  
04neonrtguy's Avatar
04neonrtguy
Thread Starter
|
Registered User
Joined: May 2008
Posts: 15
Likes: 0
From:
Default squealin' neon

So i replaced my timing belt, and both serpentine belts at 95k (water pump and timing belt tensioner as well). I noticed a very small squealing noise. Now, the car has 105k and the squealing starts when i start the engine, goes for about 10 or 15 seconds and stops. The car drives fine and when i reach my destination and stop, car still running, it does a real high pitch squealing noise and goes for however long it wants to. Someone said it might be a pulley, guy at the car shop said it might be my a/c compressor, because i have it on defrost when it does it really bad. I looked and its gonna be fun gettin to the a/c compressor so i don't want to have to do it and have it not be whats really wrong with it. I have not been on this site in a while now, and plan to start checkin it out more often. Any ideas would be greatly appreciated
 
Reply
Old Dec 21, 2008 | 06:59 PM
  #2  
bigduvall's Avatar
bigduvall
Registered User
Joined: Dec 2008
Posts: 1
Likes: 0
Default

Did you check your brake pads?
 
Reply
Old Dec 28, 2008 | 03:15 AM
  #3  
04neonrtguy's Avatar
04neonrtguy
Thread Starter
|
Registered User
Joined: May 2008
Posts: 15
Likes: 0
From:
Default

haha. it wouldnt do it when the car starts up. i know this much about cars. thanks for trying to help tho, i seen a whole lot of views and nobody could put their 2 cents in.
 
Reply
Old Dec 28, 2008 | 02:42 PM
  #4  
darthroush's Avatar
darthroush
Section Moderator
Joined: Sep 2008
Posts: 5,584
Likes: 7
From: Northern California
Default

Originally Posted by bigduvall
Did you check your brake pads?
How would the brake pads make a continuous loud squealing when the car is stopped
 
Reply
Old Dec 28, 2008 | 02:47 PM
  #5  
OneBadKota's Avatar
OneBadKota
All Star
Joined: Feb 2006
Posts: 933
Likes: 0
From: New Baltimore, Mi
Default

Best bet would be to take some WD-40 and spray each pulley as it runs. Do you live in a cold weather climate? I've had my belt squeal sometimes on vehicles when it was cold out. For a short period.


.02
 
Reply
Old Dec 28, 2008 | 11:04 PM
  #6  
mcfisher1980's Avatar
mcfisher1980
Veteran
Joined: Dec 2008
Posts: 254
Likes: 0
From: prince george, va
Default

check your belt tensioner on your serpentine belt and check the alternator belt as well. that might need to be tightened up a little. get some belt dressing, not wd40 and spray it on your pullys. that may resolve your issue
 
Reply




All times are GMT -4. The time now is 02:40 AM.