When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
well i have everything hooked up and the new plugs are installed, the coil pack looks nice on top of the valve cover lol. started the car up and it ran horrible. im pretty sure some of you are going to laugh at this. i know i did, but there is only one way to hook up these things lol. the CEL came on the moment i started my car. i hooked up my scanner and it threw P0300. which i already know is a multiple misfire. the plugs are good. i checked them right as i was putting them in. i didnt see any cracks in the ceramic part. made sure the electrode was gapped to .035. so this leads me to believe that A. i either have a bad coil pack or B. one if not all of the wires are bad. so back to the garage again. ill post another update
Last edited by mcfisher1980; 01-02-2009 at 10:10 PM.
Reason: spelling
i got it working. im guessing it had to of been the wires. i threw the old ones back on and everything was fine. im going to get a set of msd wires when i get into work today
Last edited by mcfisher1980; 01-03-2009 at 05:52 AM.
Reason: spelling
Well what an f'ing bummer! I was looking forward to buying the Granatelli ones (I have one of their other products and it works great). Has anyone contacted MP to see what they say about it?
i put them back in the box and started using it as a paper weight. i got a set of msd wires and put them on while i was at lunch. its a noticible difference from stock to this.