2nd Gen Neon 2000 - 2005 2nd Gen Neon

back up and defroster problem

Thread Tools
 
Search this Thread
 
Old Nov 15, 2011 | 07:17 PM
  #1  
Zanko's Avatar
Zanko
Thread Starter
|
Registered User
Joined: Jan 2010
Posts: 25
Likes: 0
From: Dupo, Illinios
Default back up and defroster problem

Ok so I put a new bumper on my car. And the next thing I know I'm told my back up lights don't work and my rear defrost don't work either. Any ideas how to fix this would be greatly appreciated
 
Reply
Old Nov 16, 2011 | 10:36 AM
  #2  
leprechaun1874's Avatar
leprechaun1874
Professional
Joined: Apr 2009
Posts: 183
Likes: 0
From: Charlotte NC
Default

I don't think the two are related. But for the lights make sure you did not pinch a wire and check the fuses.
 
Reply
Old Nov 28, 2011 | 09:59 AM
  #3  
Zanko's Avatar
Zanko
Thread Starter
|
Registered User
Joined: Jan 2010
Posts: 25
Likes: 0
From: Dupo, Illinios
Default

It keeps blowing the number 7 fuse
 
Reply
Old Nov 28, 2011 | 04:18 PM
  #4  
darthroush's Avatar
darthroush
Section Moderator
Joined: Sep 2008
Posts: 5,584
Likes: 7
From: Northern California
Default

Fuse 7 is for the A/C heater blower motor. Not related to the reverse lights or rear defroster in any way AFAIK.
 
Reply
Old Apr 15, 2012 | 10:25 PM
  #5  
Zanko's Avatar
Zanko
Thread Starter
|
Registered User
Joined: Jan 2010
Posts: 25
Likes: 0
From: Dupo, Illinios
Default

so i checked the fuses and I found out that the back up fuse in the side fuse panel keeps blowing as soon as I put the car in to reverse. whats messed up is it also makes my rear defroster not work as well. so im stumped on it.
 
Reply
Old Apr 16, 2012 | 04:31 PM
  #6  
darthroush's Avatar
darthroush
Section Moderator
Joined: Sep 2008
Posts: 5,584
Likes: 7
From: Northern California
Default

Have you checked the neutral safety switch wiring for a ground out/short?
 
Reply
Old Apr 17, 2012 | 09:43 PM
  #7  
Zanko's Avatar
Zanko
Thread Starter
|
Registered User
Joined: Jan 2010
Posts: 25
Likes: 0
From: Dupo, Illinios
Default

I replaced the switch cause I thought it went bad and the trans filter needed changed anyways. But I will check the wires when I get a chance to.
 
Reply




All times are GMT -4. The time now is 04:14 AM.