Low idle after vehicle warmed up
#11
Thanks bro I really appreciate if you could email me the picture blackout33@live.ca
Thanks again let me know how she runs for you!
Goodnight
Thanks again let me know how she runs for you!
Goodnight
#12
Let me know how it goes for you bro
Also can you send me the picture to blackout33@live.ca
I greatly appreciate it.
Thanks bro goodnight!
Also can you send me the picture to blackout33@live.ca
I greatly appreciate it.
Thanks bro goodnight!
#15
#16
I did that to mine, an had nothing but high idle issues down the road. Esp when the a/c was on or the rad fan during 115 degree out side temp in stop an go traffic.
I did drill the hole in the butterfly years ago, which helped dramatically. Even after I replaced all vac lines, and vac. caps there was still a lower idle.
I did drill the hole in the butterfly years ago, which helped dramatically. Even after I replaced all vac lines, and vac. caps there was still a lower idle.
#17
I turned the screw also, then turned it back after doing more research. Apparently it's not a good idea. Since I drilled a 1/8 hole in the throttle plate, I've been real happy with it. It idles about 700 rpm now when I'm sitting at a stop light, which might be a little high, but at least I don't have that annoying vibration any more.
#18
Motor Mounts
Hey Guys couple weeks ago had my passenger side upper and lower mounts replaced since then im still having vibration thru the steering wheel when stopped at a light.
I have no idea or clue how to get rid of the vibration I called mechanic told me to come back I retorqued them same issue.
Its a after market mount so I dont know if that makes a difference
He checked my other mounts and they all seemed fine
Im puzzled and stumped at this point
Ive put brand new plugs gapped @ 35
Brand new wires
Cleaned throttle body
Ive done it all that I can think of.
I dont see any vacuum leaks he even checked for that as well
Any help would be greatly appreciated.
When I bought this vehicle it never had a vibration issue at all so smooth.
Its only got 147 thousand clicks
Is it better to have a OEM Dodge Mount installed would that make a big difference???
I also just recently had to replace the car starter on it new battery and also changed the belts vehicle runs quiet but when @ a stop light the steering just vibrates annoying the heck outta me!
LOL
I like smooth vehicles
Idle is between 600-700 which apparently is fine
I had a PCM update on it as well couple weeks ago for low idle issue and that didnt help it out at all
Any help would be greatly appreciated!
I have no idea or clue how to get rid of the vibration I called mechanic told me to come back I retorqued them same issue.
Its a after market mount so I dont know if that makes a difference
He checked my other mounts and they all seemed fine
Im puzzled and stumped at this point
Ive put brand new plugs gapped @ 35
Brand new wires
Cleaned throttle body
Ive done it all that I can think of.
I dont see any vacuum leaks he even checked for that as well
Any help would be greatly appreciated.
When I bought this vehicle it never had a vibration issue at all so smooth.
Its only got 147 thousand clicks
Is it better to have a OEM Dodge Mount installed would that make a big difference???
I also just recently had to replace the car starter on it new battery and also changed the belts vehicle runs quiet but when @ a stop light the steering just vibrates annoying the heck outta me!
LOL
I like smooth vehicles
Idle is between 600-700 which apparently is fine
I had a PCM update on it as well couple weeks ago for low idle issue and that didnt help it out at all
Any help would be greatly appreciated!
#19