replacing axle seals without a needed an alignment after
Thread Starter
|
Professional
Joined: Jan 2010
Posts: 113
Likes: 1
From: centrial virginia
replacing axle seals without a needed an alignment after
I just found a leaking axle seal, and it's time for a transmission oil change.
How can I replace both axle seals without needed a 4 wheel alignment? I just had one done last week.
How can I replace both axle seals without needed a 4 wheel alignment? I just had one done last week.
Record Breaker
Joined: Apr 2013
Posts: 1,815
Likes: 56
From: Alberta
remove the ball joint nut and or thru bolt... put a chain around the control arm near the ball joint end and put a bolt thru the links to form a loop of chain. slide a big pry bar thru the chain. push down on the pry bar and it will pull down the control arm away from the knuckle. have some one hit the knuckle where the ball joint stud goes thru it. the shock will release the bj where is stuck in the taper of the knuckle.
