2nd Gen Neon 2000 - 2005 2nd Gen Neon

Trouble code 1495

Thread Tools
 
Search this Thread
 
Old Jun 7, 2006 | 01:31 PM
  #1  
chris3829's Avatar
chris3829
Thread Starter
Joined: Jun 2006
Posts: 6
Likes: 0
Default Trouble code 1495

Anyone know where the "LDP" leak detection pump soleniod circuit is located??? Is it on the tranny??...I'm getting code 1495...It's an 01 NEON ES 2.0liter. Any help would be appreciated.
 
Reply
Old Jun 9, 2006 | 03:44 AM
  #2  
ewetho's Avatar
ewetho
All Star
Joined: Nov 2004
Posts: 951
Likes: 0
From: Kankakee, IL
Default RE: Trouble code 1495

Sounds like evaporative emissions gear.
 
Reply
Old Jun 10, 2006 | 02:53 AM
  #3  
1996squishysohc's Avatar
1996squishysohc
Joined: Jun 2006
Posts: 10
Likes: 0
Default RE: Trouble code 1495

that is a code for the leak detection pump for the evaproative emissions system. the first thing you need to check is the lines and hoses that the system uses. Check all vaccum lines in the engine compartment and any rubber hoses underneath the car. If you see any that are cracked or completely split, replace them. the leak detection pump is located underneath the car by the rear suspension. Ususally when this code comes up the LDP must be replace, or there is a significant vaccum leak in the system. I attached the instructions that chrysler gives to remove the LDP. If you need anymore help please write back or email me.

REMOVAL
Raise and support vehicle on a hoist.
Push locking tab on electrical connector to unlock and remove connector.
loosen the sway bar bracket to remove the pump bracket.
Remove pump and bracket as an assembly.
Disconnect lines from LDP.
Remove filter.
Remove pump from bracket
 
Reply
Old Jun 13, 2006 | 01:39 PM
  #4  
chris3829's Avatar
chris3829
Thread Starter
Joined: Jun 2006
Posts: 6
Likes: 0
Default RE: Trouble code 1495

Thanks a million 1996
 
Reply




All times are GMT -4. The time now is 01:02 PM.