2nd Gen Neon 2000 - 2005 2nd Gen Neon

try this one

Thread Tools
 
Search this Thread
 
  #1  
Old 12-11-2006, 04:36 PM
fullbuilt's Avatar
fullbuilt
fullbuilt is offline
All Star
Thread Starter
Join Date: Nov 2006
Location:
Posts: 852
Likes: 0
Received 0 Likes on 0 Posts
Default try this one

my car has an egsaust leak. it also seems to have aq boost leek. while out of gear and revin it triesa to boost. ps its a 20g not suppose to do that. it makes it to about 7psi then nocks. while driving it makes it to 8psi before giving up its set at 14. the turbo also makes a high pitch wine. what ya think.
 
  #2  
Old 12-11-2006, 04:59 PM
spikeymikey87's Avatar
spikeymikey87
spikeymikey87 is offline
Record Breaker
Join Date: Jan 2006
Location:
Posts: 2,424
Likes: 0
Received 0 Likes on 0 Posts
Default RE: try this one

well for the nock i would try to adjust timing and are you sure the turbos good i mean like no coking and **** in it. good flow to it shaft play? and for the boost leak i woud get or make a boost leak tester and some sopapy water and go to work
 
  #3  
Old 12-12-2006, 04:38 PM
tooslow's Avatar
tooslow
tooslow is offline
Veteran
Join Date: Dec 2005
Location:
Posts: 457
Likes: 0
Received 0 Likes on 0 Posts
Default RE: try this one

what does your feul system look like rrfpr or something else and do you have wideband o/2
 
  #4  
Old 12-12-2006, 07:08 PM
GrApHite03's Avatar
GrApHite03
GrApHite03 is offline
Join Date: Oct 2005
Location: Honolulu
Posts: 2,019
Likes: 0
Received 0 Likes on 0 Posts
Default RE: try this one

You shouldn't be able to create boost at idle... or barely any if it does. Do you have a wide band? I'm curious to know what your A/F ratios are while you are reving.

This is just a theory, but you could be running pig rich at idle... Have you ever seen the rally cars sit at idle and rev? They blow silly flames out of the tail pipes. The reason they do that is they are creating boost at under 0 load by over fueling the car. The spent or extra fuel is igniting in the manifold causing the turbo to spool.

as mentioned it is just a theory...

k3v
 
  #5  
Old 12-12-2006, 08:36 PM
fullbuilt's Avatar
fullbuilt
fullbuilt is offline
All Star
Thread Starter
Join Date: Nov 2006
Location:
Posts: 852
Likes: 0
Received 0 Likes on 0 Posts
Default RE: try this one

. preaty much it but it was being created by an opening in the manafold
 
  #6  
Old 12-12-2006, 08:50 PM
spikeymikey87's Avatar
spikeymikey87
spikeymikey87 is offline
Record Breaker
Join Date: Jan 2006
Location:
Posts: 2,424
Likes: 0
Received 0 Likes on 0 Posts
Default RE: try this one

did it crack or not seal against the block properly with a gasket? if its a gasket problem ive heard copper gaskets are the **** and you can reuse them 4ever and also silicone is your friend when your pissed and just want it done
 




All times are GMT -4. The time now is 05:57 AM.