2nd Gen RAM general discussion/NON-tech This section is for general discussions about your 2nd gen RAM. Non tech related RAM threads belong here.

What Did You Do To Your 2ND GEN RAM Today?

Old Jun 15, 2013 | 03:08 PM
  #11431  
zman17's Avatar
zman17
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
Default

Originally Posted by Jimythefan
Did a tune up and oil change today.



It has been pinging a lot lately so I backed down from the 93 sct tune to the 87. I figured the plugs or wires were going bad. Replaced the Champions with Autolites 1 heat range colder and changed wires. They look good to me, nice even burn pattern. Opinions? Drivers side on right, pass on left.


Those plugs look great if you ask me . Check the gap for S&G's.
 
Reply
Old Jun 15, 2013 | 07:35 PM
  #11432  
rjameson2b's Avatar
rjameson2b
Registered User
Joined: Jun 2013
Posts: 1
Likes: 0
Default

got gas fill up instead of diesel !can i pump it out using stock lift pump and disconnect a line to catch it ?
 
Reply
Old Jun 15, 2013 | 07:37 PM
  #11433  
aofarrell2's Avatar
aofarrell2
Champion
Joined: Jun 2012
Posts: 3,096
Likes: 2
From: Iowa
Default

Don't recommend it. It could damage your lift pump, or rather will most ilkely
 
Reply
Old Jun 15, 2013 | 07:39 PM
  #11434  
stewie01's Avatar
stewie01
Legend
Joined: Mar 2011
Posts: 8,914
Likes: 4
From: Fredericksburg, Virginia
Default

Originally Posted by rjameson2b
got gas fill up instead of diesel !can i pump it out using stock lift pump and disconnect a line to catch it ?
I'm in no way trying to be an ***, but how you totally miss the whole gas in a diesel thing?

How much gas we talkin? Full tank? Half tank?
 
Reply
Old Jun 15, 2013 | 08:38 PM
  #11435  
Ramthis98's Avatar
Ramthis98
Rookie
Joined: Mar 2013
Posts: 62
Likes: 0
From: Hawaii
Default

Change all shocks
 
Reply
Old Jun 15, 2013 | 10:36 PM
  #11436  
Arde's Avatar
Arde
All Star
Joined: Jul 2011
Posts: 901
Likes: 3
From: Dayton, TX.
Default

Finished up changing timing set, water pump, thermostat, rocker arms, radiator and external trans. cooler. Glad it's all done, working in this TX. sun is brutal. Took a lot of breaks but that sun is just too damn hot.
 
Reply
Old Jun 15, 2013 | 10:41 PM
  #11437  
joshpalmer27's Avatar
joshpalmer27
Registered User
Joined: May 2013
Posts: 15
Likes: 0
From: Eastern Plains, Co
Default

Changed out the old brake pads and rotors and put new ones on. It was my first time doing all of this (19 yrs old.), and after I did everything on my own, I felt accomplished! haha
 
Reply
Old Jun 15, 2013 | 10:53 PM
  #11438  
aofarrell2's Avatar
aofarrell2
Champion
Joined: Jun 2012
Posts: 3,096
Likes: 2
From: Iowa
Default

^Texas isn't the only hot place LOL... I had to cut spindles off of a van with a cutting torch in direct sun in 92* weather... And that's here in Iowa...
 
Reply
Old Jun 15, 2013 | 10:54 PM
  #11439  
stewie01's Avatar
stewie01
Legend
Joined: Mar 2011
Posts: 8,914
Likes: 4
From: Fredericksburg, Virginia
Default

Bought the truck some gas, ICE Turtle Wax, and wheel polish. Hopefully she'll be shiny tomorrow
 
Reply
Old Jun 15, 2013 | 10:58 PM
  #11440  
aofarrell2's Avatar
aofarrell2
Champion
Joined: Jun 2012
Posts: 3,096
Likes: 2
From: Iowa
Default

Not my RAM, but drove the 1989 RAM around the farm a little. Gotta love the rumble going up a hill in 2nd
 
Reply

Thread Tools
Search this Thread

All times are GMT -4. The time now is 06:15 PM.