got the top two ball joints out.... boy this ohio weather sucks the temp was about 42...... when it was working and Yesterday was like 60

 

I miss my ram my mother has been using it for the last month. she lost her car to the bank. so she drives my ram and complans that it only gets 12 mpg. and it is loud and tall. ugh. im being nice and letting her drive my ram. and she complans!!!! my daliy is a 93 YJ . it does need a fuel injector and two new tires. I get to hear it drive away it does sound nice.

 

Did my passenger side ball joints today. The lower one was makin quite a racket when I turned the steering wheel.

For anyone who has trouble with them, just go rent the c-clamp style press tool and the 4wd adapter kit at your local parts store. It took me about 2 minutes per ball joint to press them out with the right tools, very easy.

 

grinded off the rust and rust proofed the driver's side door inside and out.
painted it, and about to go out there and clear coat it.

this should slow it down a bit.

 

put napa slotted and drilled rotors on the truck.hopefully they wont warp as quick as the stockers.breaking seams to be a little better too.

 

I unpackaged and checked all parts to install my new brush guard tomorrow....have two extra brackets (bars) and 2 bolt setup....should be a fun and confusing time!

 

Just had the windsheild replaced thanks to the untarped dump truck cruising down the highway

 

That's what I've been doing the last week:
https://dodgeforum.com/forum/2nd-gen-ram-tech/179455-eratic-iddle-and-white-smoke.html

Greetz,

Bigster

 

put new rear shocks on ima dumby and installed the last one upside down duh!!...and put all new tie rods on and stabilizer bar bushings and links o what fun

 

Well I guess you can just check my sig picture...installed my new brush guard.

Planning to install rear light guards...maybe then PIAA off road lights and/or Magnaflow Highflow Cat.