What Did You Do To Your 2ND GEN RAM Today?
#6451
It was just the $20 flexible white led's from autozone. I had a $20 credit there so it only cost me like $1.50!
And yes they are wired into the dome light, I was gonna wire them into the "door ajar" switch but all the wire colors were different than what I read in another thread, and instead of doing a trial and error I just pulled the head liner and wired them to the over head dome light! So now I can turn the dimmer switch off and they wont come on.
My friend bought some yellow ones for his bike, ill be wiring those up in a day or two. Ill get some pics too
And yes they are wired into the dome light, I was gonna wire them into the "door ajar" switch but all the wire colors were different than what I read in another thread, and instead of doing a trial and error I just pulled the head liner and wired them to the over head dome light! So now I can turn the dimmer switch off and they wont come on.
My friend bought some yellow ones for his bike, ill be wiring those up in a day or two. Ill get some pics too
#6452
Did you install them to honk with your factory horn? I had a cheap set of train horns that sounded great when they were wired be themselves, but as soon as I would connect the factory horn... It sounded like a out of tune trumpet!
#6453
It was just the $20 flexible white led's from autozone. I had a $20 credit there so it only cost me like $1.50!
And yes they are wired into the dome light, I was gonna wire them into the "door ajar" switch but all the wire colors were different than what I read in another thread, and instead of doing a trial and error I just pulled the head liner and wired them to the over head dome light! So now I can turn the dimmer switch off and they wont come on.
My friend bought some yellow ones for his bike, ill be wiring those up in a day or two. Ill get some pics too
And yes they are wired into the dome light, I was gonna wire them into the "door ajar" switch but all the wire colors were different than what I read in another thread, and instead of doing a trial and error I just pulled the head liner and wired them to the over head dome light! So now I can turn the dimmer switch off and they wont come on.
My friend bought some yellow ones for his bike, ill be wiring those up in a day or two. Ill get some pics too
#6454
Well here are the pics of the l.e.d. Courtesy lights!
This is a pic of the door open, you really cant see the light output cause my phones flash went off
Heres a pic of the light strip itself, I ran the wire through a hole in the bottom of the door, there is actually alot of room between the bottom of the door and top of the door jam.
And heres the ground right outside of the cab. Notice how you can see want your hopping into!
]
This is a pic of the door open, you really cant see the light output cause my phones flash went off
Heres a pic of the light strip itself, I ran the wire through a hole in the bottom of the door, there is actually alot of room between the bottom of the door and top of the door jam.
And heres the ground right outside of the cab. Notice how you can see want your hopping into!
]
You just gave me an idea for my next mod
#6455
Installed my Midland portable CB along with the infamous 102" whip! Negligible change from straight up to military bow. Pics to be put in the CB install thread.
Went on a Snow Patrol with our club. It was a slow day as we only pulled out 1 ford 350 dually, like 80s year. Locked the rear diff up in the snow. Lost my pictures of the pull out that my buddy did with his greenie monster.
All stopped here to air down to 10-15 psi. I went to 15.
Moving to our spot for counting:
The outpost:
Went on a Snow Patrol with our club. It was a slow day as we only pulled out 1 ford 350 dually, like 80s year. Locked the rear diff up in the snow. Lost my pictures of the pull out that my buddy did with his greenie monster.
All stopped here to air down to 10-15 psi. I went to 15.
Moving to our spot for counting:
The outpost:
#6456
Join Date: Mar 2011
Location: Fredericksburg, Virginia
Posts: 8,914
Likes: 0
Received 2 Likes
on
2 Posts
Installed my Midland portable CB along with the infamous 102" whip! Negligible change from straight up to military bow. Pics to be put in the CB install thread.
Went on a Snow Patrol with our club. It was a slow day as we only pulled out 1 ford 350 dually, like 80s year. Locked the rear diff up in the snow. Lost my pictures of the pull out that my buddy did with his greenie monster.
All stopped here to air down to 10-15 psi. I went to 15.
Moving to our spot for counting:
The outpost:
Went on a Snow Patrol with our club. It was a slow day as we only pulled out 1 ford 350 dually, like 80s year. Locked the rear diff up in the snow. Lost my pictures of the pull out that my buddy did with his greenie monster.
All stopped here to air down to 10-15 psi. I went to 15.
Moving to our spot for counting:
The outpost:
I'm jealous!
#6457
Installed my Midland portable CB along with the infamous 102" whip! Negligible change from straight up to military bow. Pics to be put in the CB install thread.
Went on a Snow Patrol with our club. It was a slow day as we only pulled out 1 ford 350 dually, like 80s year. Locked the rear diff up in the snow. Lost my pictures of the pull out that my buddy did with his greenie monster.
All stopped here to air down to 10-15 psi. I went to 15.
Moving to our spot for counting:
The outpost:
Went on a Snow Patrol with our club. It was a slow day as we only pulled out 1 ford 350 dually, like 80s year. Locked the rear diff up in the snow. Lost my pictures of the pull out that my buddy did with his greenie monster.
All stopped here to air down to 10-15 psi. I went to 15.
Moving to our spot for counting:
The outpost:
I want that bumper on the lead truck. Do you know where he got it from?
#6459
Still too pricey even if you get the DIY one from Road Rhino, additionally it has clearance issue at the front body mount. I have a remedy for that though.