What Did You Do To Your 2ND GEN RAM Today?
#821
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
I love my truck. Its my first truck and I'm its 3rd owner. It needs a tune up in transmission (slips from 1st to 2nd when making a U-turn), ball joints and an alignment. Since the a/c is pretty much blowing whatever air is outside and it's in the high 90's where I am, it has priority. It also need a new heating core, but I been putting that off. I prefer to be cold than sweating in misery.
This morning, I went to Auto Zone for a replacement gasket that sits in between the a/c line and compressor. I also picked up some brake cleaner to remove the dye. Then I went over to Big Lots to purchase 134-A freon for $5 a (12 oz.) can. Yes, Big Lots now carries this freon and it is cheapest out there (as far as I know). Grab some if you need it.
This morning, I went to Auto Zone for a replacement gasket that sits in between the a/c line and compressor. I also picked up some brake cleaner to remove the dye. Then I went over to Big Lots to purchase 134-A freon for $5 a (12 oz.) can. Yes, Big Lots now carries this freon and it is cheapest out there (as far as I know). Grab some if you need it.
#822
#825
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
I'll never divulge my secret, Muhuhahahahaha!!!! Here, maybe this will make you feel better. (The bit after the shuttle take off is what you're looking for.)
http://www.youtube.com/watch?v=kLnMH47kzro
http://www.youtube.com/watch?v=kLnMH47kzro
#826
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
So, me and my big, honkin' cast took baby out for a drive today. Took a little getting used to working the accelerator with the cast, but eventually I got the hang of it without hitting anything. So much so that I ended up doing a favor for my boat shop buddy and hauled an engine block over to the rebuilder for him. It was a good day.![Icon Wink](https://dodgeforum.com/forum/images/smilies/icon_wink.gif)
![Icon Wink](https://dodgeforum.com/forum/images/smilies/icon_wink.gif)
![Name: P3006090000.jpg
Views: 17
Size: 95.4 KB](https://dodgeforum.com/forum/attachments/2nd-gen-ram-general-discussion-non-tech/103961d1501411529-what-did-you-do-to-your-2nd-gen-ram-today-p3006090000.jpg)
#827
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
I removed the CB radio, field stripped it, cleaned all the coffee drips out of evey nook, cranny and ****. Sanded and painted the top a fresh coat of black. Added two brackets to the bottom to bolt on the floor mount ears at a better angle.
Decided to replace the 33 year old mic with a new one, and redid the power cord. Will reinstall everything Friday.
Decided to replace the 33 year old mic with a new one, and redid the power cord. Will reinstall everything Friday.
#828
#829
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
All new wagner pads, and she stops real good now.
![Icon Playing](https://dodgeforum.com/forum/images/smilies/icon_playing.gif)
![Icon Bike](https://dodgeforum.com/forum/images/smilies/icon_bike.gif)