The Official 2nd Gen RAM Forum OT thread
#511
Join Date: Nov 2008
Location: Malvern Pa - Canadensis Pa
Posts: 7,950
Likes: 0
Received 2 Likes
on
1 Post
Nah I didn't have my glasses on. So my face was in the screen to read.
Plus I have looked at the under side of my truck and other enought to tell when it has a 3" lift. I would bearly give it leveled but no chance on a 3" lift.
Tomorrow I'll get some pics of my lower control arms so you will have a better idea of what I'm talking about.
What size tires are they 265/75/16 looks to be about right.
Plus I have looked at the under side of my truck and other enought to tell when it has a 3" lift. I would bearly give it leveled but no chance on a 3" lift.
Tomorrow I'll get some pics of my lower control arms so you will have a better idea of what I'm talking about.
What size tires are they 265/75/16 looks to be about right.
#512
265/75/16's correct..when i get new shocks and springs im prolly gonna go with 2500 shocks, and 1500 springs and leafs..cause i really dont need to much stiffness and what not cause i dont pull much..i rarely pull anything over 5K pounds
i def need new shocks,springs,and leafs all around, along with a good set of 265/75/16 meats
EDIT..now that i think about it..i think ill put 2500 springs up front also..then that way its more level..and maybe later down the road go with 2500 leafs..personally i just dont wanna mess with all the rusted bolts on the underside of this thing..maybe ill have the new 1500 leafs beefed up a lil
i def need new shocks,springs,and leafs all around, along with a good set of 265/75/16 meats
EDIT..now that i think about it..i think ill put 2500 springs up front also..then that way its more level..and maybe later down the road go with 2500 leafs..personally i just dont wanna mess with all the rusted bolts on the underside of this thing..maybe ill have the new 1500 leafs beefed up a lil
Last edited by wake; 01-21-2010 at 03:56 AM.
#514
so why would i need bigger gears..im happy with my 3.55's..not to mention the trans is working great..so im not about to bother opening it up..although i could use a new pan gasket..got a lil bit of seepage
#515
im pumped, i just picked up a job where im going to mkae 500-600 bucks. im changing out the rear axle in a 03 Dakota....perfect timing to get money like that, i need it.
#518
Playoffs!
Who's goin for who, im nutural. I dont like the vikings or the saints but honestly im leaning more towards the vikings considering how far bret has taken them.
#519