My drivers side axle seal is shot and so are my upper and lower ball joints. I decided im going to do this myself so I went to auto-zone and picked up all this:

Upper ball joint
Lower ball joint
Diff Gasket
Drivers side seal
Ball joint remover
3 quarts of gear oil
Grease gun
Haynes Manual(has nothing about seals in it)

From reading all of the previous posts on this topic I think this is all I need.
I figured I would ask the pros for some advice on this job first or see if im missing anything. Thanks for the help in advanced!

 

Didnt realize I was in the wrong section. hmmm. I have no idea how to move it

 

ya man i think you got it all

the axle nut maybe hard to get off