Thats what pretty much everyone who races uses. Chevy/Ford/Toyota/Nissan, everyone runs Dana 44's in the front.

 

What year ford trucks had the TTB dana 44

 

From about 80-96 on F150 and F250's (some f250's had a dana 50 front).

The problem is finding a spindle that has the same ball joint setup. 2nd gen Dodges are different in that we have both balljoints in the axle where most Dana 44's have on in the axle and one in the spindle or something like that. If I was home I could take a look at my small fleet of trucks and tell what the differences are.

 

so now i need to find out which ones have both ball joints in the inter c's if any.

 

and Broncos.