Does anyone know what happened to the links for 4wd engagement diagnosis and TSB's for SP wire routing and such have gone? That sucks if they are gone for ever!

 

https://dodgeforum.com/forum/2nd-gen...bulletins.html GEEZ FILL OUT YOUR SIG AND SEARCH J/K

 

http://www.bing.com/search?q=Diagnos...blems+on+Dodge and this one? (click on "cached page")

 

Those are just the ones we have here, I had a ton of them bookmarked and the links are all broken.

 

what causes the link to be broken or deleted after all this time? might PM a mod. Seems like a little here and a little there get mixed up/forgot/deleted, everytime they mess with the FAQ's , I dont care for the polls as much. IMO <---------Laramie

 

The links that are not working, are from the site where they came from to begin with. I never posted the same links from here, I posted direct from wherever. I know DV has noticed this too, but he has not chimed in here.

 

chiming in.
yes, i noticed the 4x4 troubleshooting was broken. i've posted it about 1000 times and saw that it was broken sometime over the weekend.
http://dodgeram.org/tech/repair/4X4/4x4_engagment.htm

i see their basic home page is still up, but most of the links on it are broken, so its an internal problem over there. i've never copied their webpage into any df threads. i always posted the link to their site.
http://dodgeram.org/


partial success. here's the TSB's. note the slight url difference. .INFO
http://dodgeram.info/
http://dodgeram.info/tsb/index.html


internet snooping tells me that both sites (.org and .info) belong to Dave Fritz, from the Mid Atlantic Dodge Ram Owners Club. i've never talked to him, but i'll try to contact him and let him know how much we appreciate his website.

the bad part (for me) is that i was planning to print out his alignment spec's, but never did. they used to be here -
http://dodgeram.org/tech/specs/00_steer_specs.html

 

Yes, all the dodgeram.org links are gone.

 

the links are repaired and all is well again. their site underwent some major maintenance and it needed just a little more attention.

a big merry christmas wish and a thank you to Dave Fritz over at Mid-Atlantic.


so, everyone go work on your vacuum cad and get it working again.

 

Thanks again DV,