2nd Gen RAM general discussion/NON-tech This section is for general discussions about your 2nd gen RAM. Non tech related RAM threads belong here.

I got lazy!

Thread Tools
 
Search this Thread
 
Old Nov 10, 2011 | 06:44 PM
  #1  
Bens5.9l4x4's Avatar
Bens5.9l4x4
Thread Starter
|
Rookie
Joined: Oct 2011
Posts: 94
Likes: 0
From: nashville,tn
Default I got lazy!

I got lazy and took my truck to my mechanics to have him replace the brakes and adjust my hissing thermostat hose. Turns out my hose wasn't leaking he says my timing chain cover is. Quoted me at almost $1,000 I told him no that's ok ill fix it when I do my plenum and chain at the first of next year. So a day off work $340 dollars later I have new brakes and lost more than $340 dollars all for being to lazy.
 
Reply
Old Nov 10, 2011 | 06:46 PM
  #2  
dlyter09's Avatar
dlyter09
Champion
Joined: Apr 2011
Posts: 3,574
Likes: 0
From: Harrisburg,PA
Default

When i was lazy once i got screwed for 2500 bucks for a job that i could have done for ohh about 2300 cheaper. Its always better to try and do about everything you can on your own.
 
Reply
Old Nov 10, 2011 | 06:49 PM
  #3  
Bens5.9l4x4's Avatar
Bens5.9l4x4
Thread Starter
|
Rookie
Joined: Oct 2011
Posts: 94
Likes: 0
From: nashville,tn
Default

Ya I could have very easily done it myself in about an hr. I figured he'd be faster I couldn't of been more wrong
 
Reply
Old Nov 10, 2011 | 08:26 PM
  #4  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,482
Likes: 4,223
From: Clayton MI
Default

You work on one vehicle at a time. (for the most part.) Mechanics in shops try and have as many going at a time as possible, so, while they are waiting for something like rotors/drums on the brake lathe, they can be working on something else, and basically doubling their time. (I hated working flat rate.)
 
Reply




All times are GMT -4. The time now is 01:06 PM.