E-fan Installation
I was having vibration issues with the Spal fans... they snapped the drive pins.
I don't think the Spal controller is available any more.
I'm using the Flex-a-lite controller.
Spal was very good about providing spare parts for the fans, but the problem arose again after a time, so I just changed to Derale.
I'm using the Flex-a-lite controller.
Spal was very good about providing spare parts for the fans, but the problem arose again after a time, so I just changed to Derale.
Just to put my findings in the mix;
My setup is working fine in 90°F+ temps... cool as a cucumber... With a 180° Stant, I'm running 180-185°F on a scanner... doesn't matter if I'm blistering along, or backed up in traffic... the VS controller isn't going above the minimum (65%)... A/C is cold... I saw maybe 0.75mpg improvement.
My setup is working fine in 90°F+ temps... cool as a cucumber... With a 180° Stant, I'm running 180-185°F on a scanner... doesn't matter if I'm blistering along, or backed up in traffic... the VS controller isn't going above the minimum (65%)... A/C is cold... I saw maybe 0.75mpg improvement.






