2nd Gen RAM general discussion/NON-tech This section is for general discussions about your 2nd gen RAM. Non tech related RAM threads belong here.

which cherry bomb should i get?

Thread Tools
 
Search this Thread
 
Old Apr 19, 2015 | 03:16 AM
  #1  
242john360's Avatar
242john360
Thread Starter
|
Registered User
Joined: Aug 2014
Posts: 5
Likes: 0
From: washington
Default which cherry bomb should i get?

I can't figure out what cherry bomb kit will fit on my truck, i don't know if any of you have one on yours, if so what set do you have and how well does it sound? i want to have dual exhaust on my mine with glass packs. thank you in advance if you can help. I've tried to find it on there site but it was no help, they don't seem to have a way to search by vehicle and i can't find it on jets, summit, or jc whitney. also i couldn't find anything about it on here.
 
Reply
Old Apr 19, 2015 | 03:00 PM
  #2  
alaskaguy's Avatar
alaskaguy
Rookie
Joined: Apr 2014
Posts: 71
Likes: 0
From: Fairbanks, Ak
Default

You want a 3" inlet with 2.5" outlets
 
Reply
Old Apr 19, 2015 | 06:00 PM
  #3  
BBartow's Avatar
BBartow
Captain
Joined: Jun 2013
Posts: 728
Likes: 1
From: New Port Richey, Florida
Default

Pretty sure its 2.5" inlet.
 
Reply
Old Apr 20, 2015 | 07:49 AM
  #4  
242john360's Avatar
242john360
Thread Starter
|
Registered User
Joined: Aug 2014
Posts: 5
Likes: 0
From: washington
Default

ok great thank you this helps a lot, I've been thinking they were sold as kits like you'd find from flow master, magnaflow etc. but if i have to make my own then that should be a lot of fun as well. how does it sound on yours? are you happy with it?
 
Reply
Old Apr 20, 2015 | 08:13 AM
  #5  
alaskaguy's Avatar
alaskaguy
Rookie
Joined: Apr 2014
Posts: 71
Likes: 0
From: Fairbanks, Ak
Default

Yours may be a 2 1/2 inlet. If you have the same truck as mine, I just did this swap and positive mine was a 3 in
 
Reply
Old Apr 21, 2015 | 05:57 AM
  #6  
242john360's Avatar
242john360
Thread Starter
|
Registered User
Joined: Aug 2014
Posts: 5
Likes: 0
From: washington
Default

ill measure it before i do anything, no sense in buying something and it can be the wrong size, unfortunatly I'm in korea right now, so ill have to wait till i get back, i have a few plans laid out for me when i get back
 
Reply
Old Apr 22, 2015 | 07:13 PM
  #7  
mda8569's Avatar
mda8569
Rookie
Joined: Jul 2014
Posts: 64
Likes: 0
From: sw ohio
Default

Originally Posted by alaskaguy
Yours may be a 2 1/2 inlet. If you have the same truck as mine, I just did this swap and positive mine was a 3 in

You sure it wasnt a 3" outlet? Maybe yours was already replaced at one point. Pretty sure they are all 2.5" inlet oem.
 
Reply
Old Apr 27, 2015 | 07:29 PM
  #8  
alaskaguy's Avatar
alaskaguy
Rookie
Joined: Apr 2014
Posts: 71
Likes: 0
From: Fairbanks, Ak
Default

Yeah it may have been replaced at one point. It was very rusted so I didn't take time to look at the old one much.
 
Reply
Old Apr 27, 2015 | 08:26 PM
  #9  
redneck_ram's Avatar
redneck_ram
Champion
Joined: Nov 2009
Posts: 4,081
Likes: 1
From: Rochester, NH
Default

stock is 2.5 inlet, 3 outlet. for most performance exhaust the inlets are 3" with a 2.5 neck on it, so it will fit properly. outlets will be either 2.5 or 3 depending on the kit.

good luck, and have fun!
 
Reply




All times are GMT -4. The time now is 02:16 PM.