2nd Gen RAM general discussion/NON-tech This section is for general discussions about your 2nd gen RAM. Non tech related RAM threads belong here.

Selling 1996 RAM 2500 V10

Thread Tools
 
Search this Thread
 
  #1  
Old 02-02-2018 | 10:42 PM
Nickman's Avatar
Nickman
Thread Starter
|
Amateur
Joined: Feb 2017
Posts: 31
Likes: 0
Default Selling 1996 RAM 2500 V10

Selling my 1996 2500 V10, SLT, 4wd,long bed, 168,000miles. Clean Title. Has the usual Dodge paint issues starting along the bed rails. Dash just started the Dodge crack. Heater core starting to go out. Needs tires soon. It's lifted 4 inches or so and dual exhaust(truck may have come factory that way, but has magnaflow cat) Fixed the notorious loose bolts on the oil pump(rotor) retaining plate that causes loss of oil pressure, so it has new timing gasket,oil pan gasket, and camshaft position sensor, also did plugs and wires. It's started this weird thing sometimes where it hesitates while im driving at speed or accelerating, if I put my foot into it it just gets worse, if I let off the gas and then put my foot back on the gas it goes away. Not sure whats going on there, wrong plugs(It's what NAPA sold me). Faulty camshaft position sensor, I just replaced it but I hear the v10 can be finicky about non oem ones, possibly coil pack? It dies on me every now and then when I come to a stop. I'm not sure but I just don't have time to work on it any more. I would say it's in fair condition. The motor runs great and has lots of power when it's not doing the weird hesitating on me, just needs someone who might enjoy the project and it's just not me anymore.
 

Last edited by Nickman; 02-02-2018 at 10:44 PM. Reason: need to add
  #2  
Old 02-03-2018 | 09:08 AM
HeyYou's Avatar
HeyYou
Administrator
Joined: Apr 2010
Posts: 82,710
Likes: 3,425
From: Clayton MI
Default

You want to post in the Classified section here. You also need to include pics, and a price.
 



Quick Reply: Selling 1996 RAM 2500 V10



All times are GMT -4. The time now is 01:14 AM.