Engine rebuild
Thread Starter
|
Registered User
Joined: May 2021
Posts: 1
Likes: 0
Engine rebuild
I'm using the heads and intake off my old 99 1500 5.2 318 to rebuild my 01 5.9 360 both are magnums the 99 had flat top Pistons and the 01 has ported. One of the Pistons in my 01 has a hole in it I'm wondering if I can take four of the flat top pistons out of the 318 and stagger them to where I'm running two flat top pistons and two ported pistons on each Bank
Legend
Joined: Nov 2014
Posts: 8,098
Likes: 318
I'm using the heads and intake off my old 99 1500 5.2 318 to rebuild my 01 5.9 360 both are magnums the 99 had flat top Pistons and the 01 has ported. One of the Pistons in my 01 has a hole in it I'm wondering if I can take four of the flat top pistons out of the 318 and stagger them to where I'm running two flat top pistons and two ported pistons on each Bank