When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
the headlights on my truck work fine when i turn them on but when i tilt my wheel down where i like it the head lights turn off. but my highbeams work no matter if the steering wheel is tilted up or down. any ideas?
you likely have a pinched or broken wire in the harness at the multifunction switch/tilt. you'll need some long skinny torx (#20 i think) to get the knee knocker and column covers off to expose the harness. not too hard, haynes manual is pretty good on this. holler back if you need more info.
You can just take that lower dash panel off as well and get a good look at the wires coming from the multi-function switch. Then, if you can't find anything, start taking off the plastic around the actual column.