well 2 weeks ago my freind and i did the plenum gasket replacement job.while we had everything apart the water pump was also replaced.quite a job i must say,took about 10 hours to complete.but when we were done the motor fired up with no troubles.

yesterday we tackled my leaky a/c which turned out to be in the evaporater.after removing the dash to get the heater/a/c assembly out i found the $10.00 bill i lost 10 years previous. we then changed the evaporater,blower motor and heater core then tested all the vacumn lines and actuaters before reinstalling.this to is quite a task,complete job took another 8 hours to complete.i wonder what the bill would have been if i had the work done for me at a garage?

 

probably about $1000 for the plenum/wp and $1200 for ac/htr.

 

uhhh, now lets see: you made some dirty repair deeds for very little expense, and so


omg


here it comes

dirty deeds and they're done dirt cheap

thanks a lot, I'll have that tunein my head all morning

 

$2200.00 eh DB,probably parts on top of that price.

you got a ram and you need it fixed but you aint got the guts
it keeps breakin night and day enough to drive ya nuts
.................................................. ........................................

he he

 

I paid to have my plenum done - just didn't have the time to work on it myself and I couldn't have my truck out of commission for a couple of weekends while I worked on it. Bill for labor was ballpark $600 for R/R - Hughes plenum kit, Cloyes roller timing chain, and a new water pump. All told it was about $900ish for parts, labor, and tax.