2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Disasembling dash

Thread Tools
 
Search this Thread
 
  #1  
Old 10-12-2004 | 04:42 PM
nickelnutz's Avatar
nickelnutz
Thread Starter
Joined: Oct 2004
Posts: 1
Likes: 0
Default Disasembling dash

Hi. I'm in the middle of taking apart a dash on a '95 Ram regular cab and was wondering if there was any hidden clips on the top plate of the dash that you'd have to take out before it comes off. I've got all the bolts and screws pulled, but it still won't come off. Any help with this would be greatly appreciated.

Thanks.
 
  #2  
Old 10-27-2004 | 01:17 PM
bsherman3's Avatar
bsherman3
Joined: Oct 2004
Posts: 1
Likes: 0
Default RE: Disasembling dash

If you have all the screws out, then you just need to give it a good tug and maneuver it around the steering column. Did you remember to take any necessary screws out around the ashtray and cupholder. Your cigarette lighter(s) may need to be disconnected also.
 
  #3  
Old 10-27-2004 | 01:59 PM
loosewheelbob's Avatar
loosewheelbob
Joined: Jun 2004
Posts: 46
Likes: 0
From:
Default RE: Disasembling dash

If your talking about the trim that goes around the gauges and radio, do what he said. But if your trying to take out the top part that goes up to the windshield, I don't think you can take just that out without removing the ENTIRE dashboard assembly, but I may be wrong. I tried once on my '97 and ran into that problem, I ended up just putting it back together.
 



Quick Reply: Disasembling dash



All times are GMT -4. The time now is 08:17 PM.