well tomorrow i will be ripping my trucks y-pipe off and exhaust manifolds..now i am wondering if you guys got any tips or tricks or removing the bolts or the exhaust manifolds out the least painful way?? my goal is to not break any bolts..if thats possibel?? thanks

 

Lots of PB blaster, start soaking it down about yesterday haha

 

my thoughts exactly. otherwise buy PB blaster tomorrow, work on truck day afer tomorrow.

 

Im gunna go with the PB Blaster also.... wonderful stuff

 

ok now im gona ask the dumb question, what is PB Blaster, some kinda penatrating oil im guessing???

 

http://www.pbblaster.com/store/morei...m?Product_ID=1
good stuff.

 

Great stuff! And if you have a Big Lots near you, they sell it cheap - at least mine does.. Ditto on the overnight soak, really makes a dif.

 

agreed. spray the hell out of the bolts. wait a few hours do it again....right before bed, soak again. spray one more time in the morning when you start working on the truck. That is a great product. Also, make sure you rock the bolts back and forward. dont just give it hell in one direction (off). go a little off, then go a little on. By rocking it back and forwards, you decrease the chances a shearing the bolt.

 

rememer to put anti seize on the bolts when you put her back together. Makes a hell of a diff if you ever take it back apart gain

 

hmm never seen or herd of it before, ill half to look for it