When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I just picked my truck from the mechanic. Now I do not have 4x4. The mechanic replaced the catalytic coverter, changed the tranny and adjusted the bands. Could he have bumped a switch by accident?
He probably cooked one of the plastic vaccum lines going to the 4x4 motor on the front axle if he torched off the old cat. The lines are mounted on the frame rail just in front of the cat which is where they switch from metal hard lines to plastic lines.
I'm guessing that you have 4wd, just not the light on the dash. Same area, but he probably just knocked off the harness off the CAD unit which is what turns on the dash 4wd light.