Hello all,
While driving my '03 hemi ram quadcab offroad the other day I noticed that the E- brake light was on. Just to be sure at the next stop sign I pulled the release and it was supposedly already up all the way . I finally looked at it and when I pull the release handle and manually pull the pedal up, the back of the assembly touches the copper contact and the light shut off. Still with a light touch, the pedal glides down about 3/4 of an inch and it loses contact turning the light on. I looked and the cable has a little slack when the pedal is pulled all the way up, but the E-brakes work fine. Is there anything I can do to get the pedal to go all the way up again by just pulling the release? Thanks

 

you may wanna post this in the 3rd gen section, them fellas may know more about your 03

 

I've got the same problem with my 01...gotta pulle the pedal up to turn the light off.

 

Thanks shott. I will post in gen 3 also.