MUD = SLUGGISH
Champion
Joined: Jul 2005
Posts: 2,966
Likes: 3
From: Greeneville, TN
RE: MUD = SLUGGISH
ORIGINAL: Moparkid032
well instantly driving it this morning i could tell it was missing..sure enough it was...P0300 and P0305..so i am guessing water got in the plugs..or the Dis Cap..but just out of curiosity how much water are we lokking at? and can i just blow it out with a blow gun or is there a special way to do it??
here are some pics
http://i73.photobucket.com/albums/i2...y732/valey.jpg
http://i73.photobucket.com/albums/i2...ergotstuck.jpg
well instantly driving it this morning i could tell it was missing..sure enough it was...P0300 and P0305..so i am guessing water got in the plugs..or the Dis Cap..but just out of curiosity how much water are we lokking at? and can i just blow it out with a blow gun or is there a special way to do it??
here are some pics
http://i73.photobucket.com/albums/i2...y732/valey.jpg
http://i73.photobucket.com/albums/i2...ergotstuck.jpg
Not any help but your truck looks sick and thats a lot of stuck ha ha. Good luck getting it figured out
Thread Starter
|
Professional
Joined: May 2007
Posts: 206
Likes: 0
From:
RE: MUD = SLUGGISH
well i yanked the cap off today and sprayed the inside with silicone to waterproof it..it helpled..everything seemed well till i was about 2 miles from my house than it started doing it again...im waiting for her to cool down so i can double check the wires and makes sure they are in tight
Thread Starter
|
Professional
Joined: May 2007
Posts: 206
Likes: 0
From:
RE: MUD = SLUGGISH
it was a waterproof silicone..i asked my buddy at first to make sure it was ok to spray first..lol but i noticed one of my spark plug wires were just laying on the header and it melted throguh about a quarter way through so i dont know if thats the problem or not
Thread Starter
|
Professional
Joined: May 2007
Posts: 206
Likes: 0
From:
RE: MUD = SLUGGISH
lol well i gifgured out why it was missin again..the plug wire for the number 5 cylinder was loose..so i snapped it back on the plug and she is as good as ever..now what is this trick i hear about wd-40?
Captain
Joined: Feb 2007
Posts: 504
Likes: 0
From: Spokane WA
RE: MUD = SLUGGISH
wd 4o stands for water displacement...i forget what the 40 stands fo...but if you get water in your distributer and it runs like dog carp, or dies after going throw a mud hole. spray some wd 40 in the distributer cap and it will blow out the water....
