almost everytime i start my truck for the first time of the current day and pull out the driveway and put it in drive it stalls. can anyone help me with this i have a video that shows what happens at the beginning. it is a 1995 ram 5.2l V8

http://myspacetv.com/index.cfm?fusea...ideoid=7799592

 

dirty TB, injectors ... run seafoam thru the tank .. and get some TB CLEANER.... there also a DIY to clean your IAC sensor...
WELCOME TO DF !!!!

 

what's your cold idle rpm ? it should be about 1000 cold and 600 warm. if not do the TB cleaning especially the IAC port, then go from there. IAC should hold those rpm's. maybe EGR (not sure) ??

 

I bet its because of that lime green color...[:'(] jk. lol Do what the guys suggested above.

 

alright thanks guys!! you dont like the lime green?? its a really bright greenish yellow in the sun

 

did you ever find out why?

 

i had the transmission serviced and the serpentine belt changed and it stopped stalling

 

Tranny serviced in what way?

 

My trans fluid got a little low once and it stalled when I put it in D from R.It was worse when it was cold.

 

yeah thats what was wrong with mine... the transmission fluid was really low and when it was cold it would do it really bad from R to D.. i just had them put the tranny fluid in when i got a tune up