engine bay pics
#1
04-30-2008 | 06:50 PM
Thread Starter
|
Record Breaker
Joined: Jul 2006
Posts: 2,440
Likes: 1
From: PA
engine bay pics
1st pic is with the kn # 1530 of course its shorter then the AC its self dont know if i will use it or not..
2nd pic is with the paper that came with the AC ...
The crankcase breather is a mopar stamp ( keep true to the mopar)
here some reading that i found on air filter height..
http://www.dakota-truck.net/UPGRADES/FABM/fabmdml.html
[IMG]local://upfiles/40785/E505DE3229DE4BA08E1263601C334DC8.jpg[/IMG]
[IMG]local://upfiles/40785/91745B40F65D42B7BB30124C506E6469.jpg[/IMG]
2nd pic is with the paper that came with the AC ...
The crankcase breather is a mopar stamp ( keep true to the mopar)
here some reading that i found on air filter height..
http://www.dakota-truck.net/UPGRADES/FABM/fabmdml.html
[IMG]local://upfiles/40785/E505DE3229DE4BA08E1263601C334DC8.jpg[/IMG]
[IMG]local://upfiles/40785/91745B40F65D42B7BB30124C506E6469.jpg[/IMG]
#2
04-30-2008 | 07:03 PM
Legend
Joined: Jul 2007
Posts: 7,843
Likes: 13
From: DFW, Texas
RE: engine bay pics
Hey PA,
I know you had talked about experimenting with filter height since you had that body lift, but did you ever get around to it? Was this a new install or something you had just gotten around to posting?
I'd like to see if I could sneak a 3" filter in my engine bay (no body lift) but I'll probably buy a paper one so I don't feel so bad about wasting a $50 K&N filter. I have the same Mopar air cleaner as you.
I think the current K&N filter I'm running is 2.87" tall p/n 1535 I think.
I know you had talked about experimenting with filter height since you had that body lift, but did you ever get around to it? Was this a new install or something you had just gotten around to posting?
I'd like to see if I could sneak a 3" filter in my engine bay (no body lift) but I'll probably buy a paper one so I don't feel so bad about wasting a $50 K&N filter. I have the same Mopar air cleaner as you.
I think the current K&N filter I'm running is 2.87" tall p/n 1535 I think.
#3
04-30-2008 | 07:08 PM
Thread Starter
|
Record Breaker
Joined: Jul 2006
Posts: 2,440
Likes: 1
From: PA
RE: engine bay pics
ORIGINAL: aim4squirrels
Hey PA,
I know you had talked about experimenting with filter height since you had that body lift, but did you ever get around to it? Was this a new install or something you had just gotten around to posting?
I'd like to see if I could sneak a 3" filter in my engine bay (no body lift) but I'll probably buy a paper one so I don't feel so bad about wasting a $50 K&N filter. I have the same Mopar air cleaner as you.
I think the current K&N filter I'm running is 2.87" tall p/n 1535 I think.
Hey PA,
I know you had talked about experimenting with filter height since you had that body lift, but did you ever get around to it? Was this a new install or something you had just gotten around to posting?
I'd like to see if I could sneak a 3" filter in my engine bay (no body lift) but I'll probably buy a paper one so I don't feel so bad about wasting a $50 K&N filter. I have the same Mopar air cleaner as you.
I think the current K&N filter I'm running is 2.87" tall p/n 1535 I think.
Plus i wanna see what silver mite have to say about running paper vs KN .. , i always felt like there was a slight lost with the KN ...
Lets not forget im still getting the cowl hood for the truck , I took off the bushwackers fender flares so those will be for sale !!! (like the truck better without) trans is toghter but sitting in the shop ..hell i had justenough time to put the AC on and take pics..
#5
04-30-2008 | 07:25 PM
Legend
Joined: Jul 2007
Posts: 7,843
Likes: 13
From: DFW, Texas
#6
04-30-2008 | 07:30 PM
Thread Starter
|
Record Breaker
Joined: Jul 2006
Posts: 2,440
Likes: 1
From: PA
RE: engine bay pics
ORIGINAL: aim4squirrels
Maybe you could double stack a set of filters. Just RTV them together in the middle and saddle up with a run of electrical tape around the center.
Whoa, I just got booted off, logged out, and cookie login erased, what just happened? Did I offend the DF Gods?
Maybe you could double stack a set of filters. Just RTV them together in the middle and saddle up with a run of electrical tape around the center.
Whoa, I just got booted off, logged out, and cookie login erased, what just happened? Did I offend the DF Gods?
