Mystery wet spot
Thread Starter
Joined: Feb 2006
Posts: 46
Likes: 0
From:
Mystery wet spot
OK, guys I’ll try to remember what I can from what I saw by just checking over my truck. I didn’t have a lot of time to really dig into what I saw.
On the passenger side of the front axel, I’m assuming this is the CAD unit. It looks like thick oil is very slowly dripping. I don’t see anything dripping off the engine block. What would this be, and is this a sign of needing to replace/remove the CAD?
I also noticed a little bit of coolant puddle on the underside of a screw on the transmission pan. I didn’t have time to trace the leak back, probably just a dripping hose. Any thought on this would be much appreciated.
The truck is a ’98 2500 4X4 with the 5.9(360) 110,000 miles on mostly original parts.
Posting pictures might be a little hard, but if need be I’ll try tomorrow.
On the passenger side of the front axel, I’m assuming this is the CAD unit. It looks like thick oil is very slowly dripping. I don’t see anything dripping off the engine block. What would this be, and is this a sign of needing to replace/remove the CAD?
I also noticed a little bit of coolant puddle on the underside of a screw on the transmission pan. I didn’t have time to trace the leak back, probably just a dripping hose. Any thought on this would be much appreciated.
The truck is a ’98 2500 4X4 with the 5.9(360) 110,000 miles on mostly original parts.
Posting pictures might be a little hard, but if need be I’ll try tomorrow.