http://www.thurenfabrication.com/stocktb.html

http://www.klmstore.com/solidsteelin...geram1500.aspx

http://www.dtprofab.com/DT_DODGE%201.htm

Never used any of them but I like the look of the Profab one

 

thanks a lot for you help guys

 

can it mess anything up is I leave it how it is a lil uncentered?

 

Since your not the original owner, I'd say take i to a body shop and see if the frame needs to be straightened out. If you leave everything a little out of whack, the truck is going to ride out of whack. Not to mention your tires will always wear funny.

 

Don't worry about it. They all dog track a bit.
Mine is off about 2 inches to theLeft for 10 years because of the lift. No abnormal tire wear or handling.

Get a good 4 wheel alignment or 2 wheel thrust angle alignment and you should be good to go.
Go to a proper truck alignment shop not just a regular shop that also does alignments. You have a better chance of getting an experienced tech who will do a better job.